Spotlights, also known as spotlights, are mainly used in large-area operation sites, mines, building outlines, stadiums, overpasses, monuments, parks and flower beds. Almost all large-area lighting fixtures used outdoors can be regarded as floodlights. However, if such lamps want to enter the European market, they need to apply for CE certification. EU CE certification is a pass for products to enter the European market. The floodlights exported to EU countries need to pass the requirements of LVD and EMC directives.
What is CE certification?
The "CE" mark is a safety certification mark and is regarded as a passport for manufacturers to open and enter the European market. CE stands for Conformite Europeenne. In the EU market, the "CE" mark is a mandatory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, in order to circulate freely in the EU market, the "CE" mark must be affixed to indicate that the product Comply with the basic requirements of the EU Directive on New Approaches to Technical Harmonization and Standardization. This is a mandatory requirement for products under EU law.
CE certification provides a unified technical specification for the trade of products from various countries in the European market and simplifies the trade procedure. To enter the European Union and the European Free Trade Area, the products of any country must be CE certified, and the CE mark should be affixed to the product. Therefore, CE certification is a passport for products to enter the European Union and European Free Trade Zone countries.
Floodlight CE certification test standard
LVD safety test: EN60598-1:2017; EN 60598-2-5-2015;
EMC electromagnetic compatibility test: EN62471:2008 or EN62778-2012; EN62493:2015
Flood light CE certification testing project
LVD (Low Voltage Directive) test items include the following aspects: fault (test), impact, vibration, impact, electrical clearance, creepage distance, electric shock, heat generation, overload, temperature rise test.
EMC (Electromagnetic Compatibility) test items include the following aspects: radiation radiation, conduction conduction, SD static electricity, CS conduction anti-interference, RS radiation anti-interference, and EFT pulse.
Documents to be prepared for CE certification application for floodlights
1. Product difference table;
2. Circuit schematic diagram, copper foil wiring diagram, component silk screen diagram;
3. Project structure dimension drawing;
4. Specifications of inductors and transformers;
5. BOM table;
6. List of key components;
7. Label, date code;
8. Installation manual;
9. LED specification.
Flood light CE certification process
Step 1: Apply
1. Fill in the application form
2. Application company information form
3. Provide product information and send samples
Step 2: Quote
According to the information provided, ZRLK inspection engineers determine the test standard, test time and corresponding cost
Step 3: Payment
After the applicant confirms the quotation, sign the application form and service agreement and make payment
Step 4: Test
The laboratory conducts a full set of tests on the applied products according to the relevant EU testing standards
Step 5: Test Passed, Report Complete
Step 6: The project is completed and the CE certificate is issued
Please contact our company ZRLK for CE certification of floodlights. We will provide you with professional and efficient testing and certification services with favorable prices and considerate service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!
